– an electronic control unit in TATRA vehicles, equipped with CAN bus bar under SAE J1939 standard and connected in the Urea Dosing System in the vehicle.
It is used for permanent monitoring of the advance injection angle and it informs the driver, by switching the emission control lamp (MIL), if the figure exceeds the specified tolerance limit; it also ensures other signals of malfunction and recording of any failures in the memory.
– Item in TATRA ……….443 811 029 000
– electronic control units in TATRA vehicles, equipped with CAN bus bar under SAE J1939 standard.
Among other things, the units are used mainly for control of the cooling and preheating systems, control of the engine brake and diagnostic functions of TATRA engines.
– Item in TATRA for TEU-1 ……………..TW 02437
– Item in TATRA for TEU-1 MIL ………. TW 04711
– an electronic control unit in TATRA vehicles, equipped with CAN bus bar under SAE J1939 standard.
The unit is used for a wide range of back-up functions in the TATRA Phoenix trucks.
The above functions are related mainly to communication with the LIN type electronic switches and with the control of the engine torque.
– Item in TATRA ……….TW 05268
– the manufacture was terminated
– it is an analogue controller which operates the system of power limitation in TATRA engines
– Item in TATRA ……….443 811 019 000
– controls continuously the luminance of the lamps used to light the devices, it is operated with a three-position button; the specified level of luminance is stored in the EEPROM memory after turning off the power and, therefore, the last value of the lamp luminance will be set when it is turned on again
– Item in TATRA ……….443 811 024 000
– the filter is used for alternator interference suppression in special TATRA vehicle applications.
– this filter replaces the previously manufactured filter indicated as FA28V65A
– Item in TATRA ……….443 412 020 000
– an electronic control unit in TATRA vehicles, equipped with CAN bus bar under SAE J1939 standard.
The unit is used for blocking of transmission gear shifting and it also controls shifting of TATRA additional gear, in cooperation with other control units supplied by other manufacturers (ZF, Allison).
– Item in TATRA ……….TW 01459
– an electronic control unit in TATRA vehicles, equipped with CAN bus bar under SAE J1939 standard.
The unit is used for control and limitation (if applicable) of the torque of the vehicle engine, in cooperation with the manual or automatic transmission.
– Item in TATRA ……….TW 03604
– the series manufacture was terminated and transferred into a spare parts mode
– they are the microprocessor control units which control the cooling system of TATRA vehicles
– from the electrical point of view, they are replaceable by previously manufactured JW5 units (only the case of MT 05 units is smaller)
– the units are replaceable as follows: JW5.007 = MT 05.7, JW5.008 = MT 05.8
– Item in TATRA for MT 05.7……….443 811 022 000
– Item in TATRA for MT 05.8………. –
– the manufacture was terminated
– the unit controls the system of exhaust brake in TATRA vehicles
– the filter is used for alternator interference suppression in special TATRA vehicle applications.
– Item in TATRA ……….443 811 028 000
– an electronic control unit in TATRA vehicles, equipped with CAN bus bar under SAE J1939 standard.
The unit is used for measuring of the weight of load in TATRA vehicles based on the principle of measuring air pressure in the vehicle suspension air bags.
The weight of load is displayed on the LCD in the cab of the vehicle.
– Item in TATRA ……….TW 02823
– an electronic control unit in TATRA vehicles, equipped with CAN bus bar under SAE J1939 standard.
The unit is used for continuous monitoring of wear and tear of the brake discs, based on the configuration up to 8 wheels of the vehicle.
– Item in TATRA ……….TW 03592
– the manufacture was terminated – the units are replaceable by MT30.01
– apart from the cooling system, the above control units also control electric preheating of the engine and operation of the exhaust brake in TATRA vehicles. The units are equipped with the system for control and recording of any exceeded permitted values of operational parameters of the engine unit in their permanent memory EEPROM.
– from the electrical point of view, they are replaceable by previously manufactured JW25 units (only the case of MT 25 units is smaller)
– the units are replaceable as follows: JW25.003 = MT 25.3, JW25.004 = MT 25.4
– Item in TATRA for MT 25.3.
………443 811 020 000
– Item in TATRA for MT 25.4.
………443 811 021 000
– the manufacture was terminated
– the voltage converter increases the voltage of 12V up to 24V in vehicles equipped with 12V network
– the series manufacture was terminated and transferred into a spare parts mode
– they are approximately replaceable by TEU control units
– apart from the cooling system, the above microprocessor-controlled units also control electric preheating of the engine and operation of the exhaust brake in TATRA vehicles. For the user, the units are programmed based on some of their control and identification parameters. All units are equipped with the system for control and recording of any exceeded permitted values of operational parameters of the engine unit in their permanent memory EEPROM. Furthermore, the units are equipped with communication connector pins for communication with the superior computer system.
– MT 30.02 units also enable turning off the engine with the key in the ignition lock. Concerning the units of these series, in electrical installation of the vehicle, continuous power supply voltage of 24V (terminal 30) needs to be applied to their connector pins No. 3.
– after proper programming by authorised persons (dealers of TATRA a.s., after completing the relevant training), these units are replaceable by MT25 units.
– Item in TATRA for MT 30.01……….443 811 023 000
– Item in TATRA for MT 30.02……….443 811 025 000
– this analogue indicator is used for operation of the control lamp for fuel reserve in VDO-Kienzle fuel level sensors in TATRA vehicles.
– Item in TATRA ……….443 811 026 000
Considering the termination of the manufacture of TATRA T-700 passenger cars, we specify only a short overview of our products in such cars:
1) Microprocessor-Controlled Electric Unit TachoTronic T700 in the Instrument Panel
2) Signal Adapter ASS-1
3) Adapter RAT-8A
4) Electric Thermostatic Unit TST-01
